SEARCH ENGINEERING RESEARCH PAPERS

ETAP IEEE PAPER



Design of grounding systems in substations by ETAP intelligent software
free download

Abstract-Under ground-fault conditions, the flow of current will result in voltage gradients within and around the substation, not only between structures and nearby earth, but also along the ground surface. In a properly designed system, this gradient should not exceed

ETAP project status report.December 2000
free download

ETAP is the acronym of the project Creating and annotating a parallel corpus for the recognition of translation equivalents . This project is a part of a joint

Load Flow Analysis of 132 kV substation using ETAP Software
free download

Abstract-Power is essentially required for the development of any country. To maintain the generation of electric power at adequate level the power has to be transmitted in proper form and quality to the consumer. This research paper deals with the simulation of 132 kV

Design Analysis of 220/132 KV Substation Using ETAP
free download

Abstract Electrical power system provides a vital service to the society. For healthy operation of electrical power generation, transmission and distribution, it is important that system should be balanced. This research paper deals with the simulation of 220/132 kV

Harmonic Transient Stability Analysis of GIS TRANSCO Network Using ETAP
free download

Abstract: In this paper we are focusing on the power flow, harmonic, transient analysis reduce the power losses by using different techniques in the GIS TRANSCO network in which the transmission done from 400KV to the distribution of 66KV. With the help of

Relay Coordination using ETAP
free download

Abstract:Relays and circuit breakers are heart of the modern large interconnected power system. Proper coordination of relays is essential to minimize unnecessary outages. This paper presents short circuit analysis and relay coordination of overcurrent relays of a

Simulation of Cascade Tripping Using ETAP
free download

Abstract:Cascading failure occurs when an initial disturbance in a power transmission system propagates to cause a widespread blackout. Large cascading failures are not frequent, but they have substantial risk due to their large societal costs. Analysis of

Transient Stability Analysis of Grid Using ETAP
free download

Abstract: Power-system stability is a term applied to alternating-current electric power systems, denoting a condition in which the various synchronous machines of the system remain in synchronism, or" in step," with each other. Conversely, instability denotes a

ETAP-3 Linguistic Processor: a Full-Fledged NLP Implementation of the Meaning Text Theory1.
free download

Abstract A multifunctional NLP environment, ETAP-3 linguistic processor, is presented. The environment, largely based on the Meaning Text Theory, offers several NLP applications, including a machine translation system, a module of synonymous paraphrasing of

Impact of Loads on Power Flow in Power Systems Using PowerApps and ETAP
free download

Abstract. This paper presents a study of the impact of loads on power flow in power system. It deals with the impact of both the voltage nodes and the transmission of active and reactive power in lines, and therefore the loss of active and reactive power in the system. Flexible

Voltage sag and Harmonics Mitigation in Grid Connected WECS using UPFC in ETAP
free download

Abstract: This paper demonstrates the mitigation of power quality issues in a grid connected wind energy conversion system using UPFC. The procedure to compensate the power quality issues like voltage sag and harmonics are presented. A Frame work for 25 bus test

Power Devices Implementation Analysis in ETAP
free download

Abstract:Power system engineers are currently facing challenges to increase the power transfer capabilities of existing transmission system. This is where the Flexible AC Transmission Systems (FACTS) technology comes into effect. With relatively low

Load Flow Analysis of 220 kV MSETCL substation by using ETAP
free download

Abstract: Load flow studies are used to determine the magnitude of voltage, voltage angle, active and reactive power flows at all buses in a power system. Load flow studies are an excellent tool for system planning. A number of operating procedures can be analyzed,

Professor Nash ETAP 201 May 15, 2014
free download

Problem Statement and Research Question There is no denying that the methods and strategies of teaching English Language Arts to English language learners have changed in the 20th century . In schools

Co-ordination of Overcurrent Relay for Chemical Industrial Plant using ETAP
free download

Abstract: Recent past scenario various practices were invented for relay coordination. Typical power system comprises number of important equipments which have to be protected. In order to provide sufficient reliable protection to ensure smooth working of

REFLECTING ACCENTUATION IN THE RUSSIAN MORPHOLOGICAL DICTIONARY OF THE MULTIFUNCTIONAL LINGUISTIC PROCESSOR ETAP-31
free download

Our work is aimed at the introduction of accentual information into the morphological dictionary of the multifunctional linguistic processor ETAP-3. A special formal description language has been created, and special rules for most of the basic accentual schemes


FREE ENGINEERING RESEARCH PAPERS